Description
Zoeller 3HP Sewage Pump 20′ Cord 230V
- Key Features
- Specs
- Warranty
-
Cast iron casting, class 25-30 25000# tensile strength
Oil-filled, hermetically-sealed, automatic reset thermal overload protected (1 Ph only) motor
Upper and lower ball bearing running in bath of oil
Mechanical shaft seal – carbon and ceramic rotary face seal, with stainless steel wetted parts
1117 carbon steel motor shaft (single seal models)
Stainless steel screws, bolts, washers and lifting bracket
Neoprene square ring and gasket
Maximum temperature: 130 °F (54 °C) standard
Variable level controls available
4” horizontal flanged discharge, standard ANSI flange
Passes 3” (76 mm) spherical solids
Corrosion-resistant, powder coated epoxy finish
Non-automatic available
Applications include:
- High capacity water removal – parking lots, low flood areas, water transfer
- To meet 3″ intake, 4″ discharge code requirements on some sewage applications
- Retrofit on existing sewage installations
- New installations
SHIPPING IS NOT FREE ON THIS PRODUCT
-
Motor 2 or 3 HP Voltage 200 – 575 V Phase 1 or 3 Ph Hertz 60 Hz RPM 1725 RPM Type Permanent split capacitor or 3 phase Insulation Class B Amps 4.1 – 20.2 Amps Operation Automatic and non-automatic Discharge Size 4″ horizontal ANSI flange Solids Handling 3″ (76mm) spherical solids Cord Length 20′ (6 m) standard Cord Type UL listed, 3-wire neoprene cord and plug Max Head 38′ (11.6 m) Max Flow Rate 361 GPM (1367 LPM) Max Operating Temperature 130 °F (54 °C) Cooling Oil filled Motor Protection Auto reset thermal overload (1 Ph) Cap Cast iron Motor Housing Cast iron Pump Housing Cast iron Base Cast iron Upper Bearing Ball bearing Lower Bearing Ball bearing Mechanical Seals Carbon and ceramic Impeller Type Non-clogging vortex Impeller Cast iron Hardware Stainless steel Motor Shaft 1117 carbon steel or 416 stainless steel* Gasket Neoprene
